Any suggestions for breaking the plunger loose? I sprayed PB Blaster off and on into the plunger, today, but can't get the plunger to budge.
soak in yamaha carb cleaner, if still no go, heat the side if the choke chamber with heat gun,,,bv
Gasoline, carb cleaner, and a heat gun. A perfect combination..........
Living on the edge!
MTDR is not responseable for any insane or negligent comments or suggestion made by its members that cause bodily injury or DEATH,,,,bv
if not resolved yet. send carb and cable to me, ill put in the ultrasonic cleaner and get it done.
Sorry for ignoring you, but have been off the grid for a while after having thumb surgery. Finally got back to the carb this week. After soaking with various solvents and using an ultrasonic cleaner, I decided I was done and put a KX65 carb on it. I'm going to play with the jetting a little, but it actually runs pretty good with the stock jets - and it seems to have more get up and go. I had to get a longer fuel hose, but the boots fit and I used one of the two throttle cables.
Middle Tennessee Dirt Riders, Inc.
Contact Us - mailto:firstname.lastname@example.org for any comments or questions that you have about our club,
your membership, website access, or anything else you might need assistance with.